Hot Rolled AZ Sheet Pile Specifications
DESCRIPTION

Hot Rolled AZ steel sheet piles are manufactured by ArcelorMittal in Luxembourg.

 

 

AZ sections are continuous through the web with the interlocks located symmetrically on each side of the neutral axis, this positively influences the section modulus.

  • Proven qualities of the Larsen interlock
  • Extremely competitive section modulus to mass ratio
  • Increased inertia for reduced deflection
  • No interlock shear reduction factors that do apply to U piles
  • Wide profiles, resulting in improved installation performance
  • Improved corrosion performance with increased steel thickness at the critical corrosion points

 

Section Width Height Thickness Sectional
Area
Mass Section
Modulus
Moment of
Inertia
b mm h mm t mm s mm cm2/m kg/m Single Pile kg/m2of Wall cm3/m cm4/m
 AZ-800
AZ 18-800 800 449 8.5 8.5 129 80.7 101 1840 41320
AZ 20-800 800 450 9.5 9.5 141 88.6 111 2000 45050
AZ 22-800 800 451 10.5 10.5 153 96.4 120 2165 48790
AZ 23-800 800 474 11.5 9.0 151 94.6 118 2330 55260
AZ 25-800 800 475 12.5 10.0 163 102.6 128 2500 59410
AZ 27-800 800 476 13.5 11.0 176 110.5 138 2670 63570
 AZ-750
AZ 28-750 750 509 12.0 10.0 171 100.8 134 2810 71540
AZ 30-750 750 510 13.0 11.0 185 100.8 145 3005 76670
AZ 32-750 750 511 14.0 12.0 198 116.7 156 3200 81800
 AZ-700 and AZ-770
AZ 12-770 770 344 8.5 8.5 120 72.6 94 1245 21430
AZ 13-770 770 344 9.0 9.0 126 76.1 99 1300 22360
AZ 14-770 770 345 9.5 9.5 132 79.5 103 1355 23300
AZ 14-770 10/10 770 345 10.0 10.0 137 82.9 108 1405 24240
AZ 12-700 700 314 8.5 8.5 123 67.7 97 1205 18880
AZ 13-700 700 315 9.5 9.5 135 74.0 106 1305 20540
AZ 13-700 10/10 700 316 10.0 10.0 140 77.2 110 1355 21370
AZ 14-700 700 316 10.5 10.5 146 80.3 115 1405 22190
AZ 17-700 700 420 8.5 8.5 133 73.1 104 1730 36230
AZ 18-700 700 420 9.0 9.0 139 76.5 109 1800 37800
AZ 19-700 700 421 9.5 9.5 146 80.0 114 1870 39380
AZ 20-700 700 421 10.0 10.0 152 83.5 119 1945 40960
AZ 24-700 700 459 11.2 11.2 174 95.7 137 2430 55820
AZ 26-700 700 460 12.2 12.2 187 102.9 147 2600 59720
AZ 28-700 700 461 13.2 13.2 200 110.0 157 2760 63620
AZ 24-700N 700 459 12.5 9.0 163 89.7 128 2435 55890
AZ 26-700N 700 460 13.5 10.0 176 96.9 138 2600 59790
AZ 28-700N 700 461 14.5 11.0 189 104.1 149 2765 63700
AZ 36-700N 700 499 15.0 11.2 216 118.6 169 3590 89610
AZ 38-700N 700 500 16.0 12.2 230 126.4 181 3795 94840
AZ 40-700N 700 501 17.0 13.2 244 134.2 192 3995 100080
AZ 42-700N 700 499 18.0 14.0 259 142.1 203 4205 104930
AZ 44-700N 700 500 19.0 15.0 273 149.9 214 4405 110150
AZ 46-700N 700 501 20.0 16.0 287 157.7 225 4605 115370
AZ 48-700 700 503 22.0 15.0 288 158.5 226 4755 119650
AZ 50-700 700 504 23.0 16.0 303 166.3 238 4955 124890
AZ 52-700 700 505 24.0 17.0 317 174.1 249 5155 130140
 AZ
AZ 18* 630 380 9.5 9.5 150 74.4 118 1800 34200
AZ 18 10/10 630 381 10.0 10.0 157 77.8 123 1870 35540
AZ 26* 630 427 13.0 12.2 198 97.8 155 2600 55510
AZ 46 580 481 18.0 14.0 291 132.6 229 4595 110450
AZ 48 580 482 19.0 15.0 307 139.6 241 4800 115670
AZ 50 580 483 20.0 16.0 322 146.7 253 5015 121060

* AZ sections can be rolled-up or down by 0.5mm and 1.0mm on request.

Production of the following ArcelorMittal sheet pile sections has been discontinued: AZ12, AZ13, AZ13 10/10, AZ14, AZ34, AZ36, AZ38, AZ36-700, AZ37-700, AZ38-700, AZ39-700, AZ40-700, AZ41-700.

Please contact us if you require information about these sections.