bearing560x135

HP & UBP Bearing Piles


The HP and UBP bearing piles are special wide flange H beam sections with the same thickness in the flange and web, this assists with the structural integrity during driving and when obstructions are encountered. Bearing piles can be provided in various steel grades with yield strength up to 460 MPa.

 The primary advantages of HP and UBP steel bearing piles are: 

  • Excellent durability; numerous experiences for totally embedded piles showed a corrosion rate tending to zero
  • Load bearing immediately after installation
  • Easy handling, transport, storing and installation
  • Pile length can be easily extended by splicing to suit ground conditions
  • Simple confirmation of the bearing capacity by measurement of 'sets' during driving
  • Straight forward connection to the superstructure
  • Accommodates complex load combinations of bending moment with tension or compression loads
SectionMass (G)DimensionsSteel Area (A)Total areaPerimeterMoment of inertiaSection modulus
kg/mh
mm
b
mm
tw mmtf
mm
cm2cm2my-y cm4z-z
cm4
y-y
cm3
y-y
cm3
z-z
cm3
 HP 220 x 57.2 57.2 210 224.5 11 11 72.9 471.5 1.265 5729 2079 545.6 185.2
 HP 260 x 87.3 87.3 253 267 14 14 111.2 675.5 1.505 12590 4455 994.9 333.7
 HP 260 x 75 75 249 265 12 12 95.54 659.8 1.493 10650 3733 855.1 281.7
 HP 305 x 110 110 307.9 310.7 15.3 15.4 140.2 955.4 1.8 23560 7709 1531 495
 HP 305 x 126 126 312.3 312.9 17.5 17.6 161 976.2 1.813 27410 9002 1755 577.2
 HP 305 x 149 149 318.5 316 20.6 20.7 190 1005 1.832 33070 10910 2076 688.8
 HP 305 x 180 180 326.7 319.7 24.8 24.8 229.3 1044 1.857 40970 13550 2508 847.4
 HP 305 x 186 186 328.3 320.9 25.5 25.6 237 1052 1.861 42610 14140 2596 879.3
 HP 305 x 223 223 337.9 325.7 30.3 30.4 285 1100 1.891 52700 17580 3119 1081
 HP 305 x 88 88 301.7 307.8 12.3 12.4 111.6 926.8 1.782 18420 5984 1221 387.3
 HP 305 x 95 95 303.7 308.7 13.3 13.3 121.7 936.6 1.788 20040 6529 1320 425.1
 HP 320 x 103 103 307 306 14 14 131 939.4 1.764 22050 6704 1437 438.2
 HP 320 x 117 117 311 308 16 16 149.5 957.9 1.776 25480 7815 1638 507.5
 HP 320 x 147 147 319 312 20 20 186.9 995.3 1.8 32670 10160 2048 651.3
 HP 320 x 184 184 329 317 25 25 234.5 1043 1.83 42340 13330 2574 841.2
 HP 320 x 88.5 88.5 303 304 12 12 112.7 921.1 1.752 18740 5634 1237 370.6
 HP 360 x 109 109 346.4 371 12.8 12.9 138.9 1283 2.123 30630 10990 1769 590.7
 HP 360 x 133 133 352 373.8 15.6 15.7 168.5 1314 2.14 37980 13680 2158 725.3
 HP 360 x 152 152 356.4 376.0 17.8 17.9 193.8 1338 2.153 43970 15880 2468 842.3
 HP 360 x 174 174 361.4 378.5 20.3 20.4 221.7 1367 2.169 51010 18460 2823 973.5
 HP 360 x 180 180 362.9 378.8 21.1 21.1 229.5 1375 2.173 53040 19140 2923 1011
 HP 360 x 84.3 84.3 340 367 10 10 107.3 1248 2.102 23190 8243 1364 449.2
 HP 400 x 122 122 348 390 14 14 155.9 1357 2.202 34770 13850 1998 710.3
 HP 400 x 140 140 352 392 16 16 178.6 1380 2.214 40270 16080 2288 820.2
 HP 400 x 158 158 356 394 18 18 201.4 1403 2.226 45940 18370 2581 932.4
 HP 400 x 176 176 360 396 20 20 224.3 1426 2.238 51770 20720 2876 1047
 HP 400 x 194 194 364 398 22 22 247.5 1449 2.25 57760 23150 3174 1163
 HP 400 x 213 213 368 400 24 24 270.7 1472 2.262 63920 25640 3474 1282
 HP 400 x 231 231 372 402 26 26 294.2 1495 2.274 70260 28200 3777 1403

J Steel can supply a comprehensive range of bearing pile sections to Australian and International standards. We have limited stocks of heavy sections or alternatively we can supply mill direct, minimum order quantities apply. Click here for a set of printable PDF’s: Beams and Columns

Tubular steel can be used as bearing piles for deep foundations. The load capacity of these sections can exceed that of beam bearing piles due to the capability to manufacture large diameter and long length piles. For further information refer to Tubular Piles and Pipes

If you are interested in other sections not represented here please contact us for details.


Ask A Question


By clicking Submit you are agreeing to our Terms & Conditions and Privacy Policy | * Denotes a mandatory field.